-40%

Peruzzo Bull Cross 70" Ditch Bank Flail Mower: External Gearbox For Most Reach!

$ 5277.36

Availability: 100 in stock
  • Country/Region of Manufacture: Italy
  • Brand: Peruzzo Bull Cross
  • Compatible Equipment Type: Tractor
  • Make: Peruzzo
  • Hook Up: 3-Point Hitch
  • Mower Type: Flail Mower
  • All returns accepted: ReturnsNotAccepted
  • Fits Hitch Category: 2
  • Compatible Equipment Make: Universal
  • Type: Flail Mower
  • Gearbox: 110 hp
  • Condition: New
  • California Prop 65 Warning: WARNING: Risk of Cancer & Reproductive Harm - See Specific Details at www.P65Warnings.Ca.Gov
  • Model: Peruzzo Bull Cross 1800E
  • MPN: 1800E

    Description

    Heavy
    Duty Professional Series:
    Peruzzo Bull Cross 1800E, 70" Cut, Hydraulic Offset & Tilt, External Gearbox for Maximum Reach!
    Expect This Peruzzo Mower & ALL Of The Equipment We Sell To Be Quality Equipment That Will Serve You Well For A Lifetime And Provide A Good Resale Value Too!
    ABSOLUTELY ALL THE BEST FEATURES!:
    This Peruzzo Flail Mower Has a 16" Dia. Severe Service Duty Rotor With
    16 Large
    Forged & Hardened Steel Hammer
    Blades
    - Peruzzo Flail Mowers Always Have the Highest Population of Blades to Provide the Best Possible Cut & Reduce the Burden on Your Tractor!
    These Substantial Blades Can Be Sharpened Multiple Times & Typically Have a Very Long Life!
    Use The Convenience of The Upward 90° Rotation & Remain Standing to Inspect, Sharpen & Service The Blades!
    Peruzzo Mower Gearboxes Include an Over-Running Clutch, Which Provides Two Advantages:
    First, Easy Alignment & Attachment of the Mowers PTO Shaft to the Tractors PTO Shaft:
    The O.R. Clutch Enables you to Freely Spin the PTO Shaft & Gearbox for Alignment!
    Second, Smooth Shut Down:
    The O.R. Clutch Allows the Mower Gearbox to Free Wheel to a Stop, Eliminating Abrupt Shutdowns & Wear of the PTO Brake!
    Peruzzo Gearboxes Also Include an Easily Visible 'Oil Level Sight Glass' for Clean, Convenient & Tool Free Gearbox Oil Level Checking!
    Offset & Head Positioning Functions Operate Hydraulically.
    'Raise & Lower Cylinder' Has Three Unique Features for Performance Efficiency, for Mechanical Protection of the Mower, and for Operator Safety:
    1) Adjustable Flow Control Valve for Hydraulic Speed Control:
    Prevents Shock Loads From Operators Abrupt & Rapid Downward Deck Rotation (then hammering our precious earth), or Abrupt & Rapid Upward Deck Rotation (then hammering the mechanical connections):
    Set This Valve to a Slower Setting Until You've Mastered Feathering the Controls to Rotate the Deck 90° Upward, or 60° Downward!  Once You've Got it, You Can Adjust the Flow Control Valve for Faster Operation!
    2) Horizontal (Left to Right) Mower Deck Oscillation for Automatic Contour Adjustment:
    The Cylinder Barrel is Pinned to a Clevis Bracket, Which is Secured to the Mower Deck via a Bracket With an Oval Pin Opening for Oscillation Travel.
    3) Safety Locking Valve for More Personnel & Equipment Safety!
    Dual Breakaway (Hyd & Mech) Limited & Self-Resetting:
    Mechanical Breakaway:
    Lower Right Rear of 3-Pt Frame Has a Removeable Pin for 'Lock-In-Place' Operation (when mowing level, predictable terrain), or Remove the Pin for Limited & Self-Resetting Breakaway Protection - Also for Front to Rear Deck Oscillation (for following uneven terrain).
    Hydraulic Breakaway:
    The 'Extend & Retract Cylinder' Has a Relief Valve for Limited & Self-Resetting Breakaway.
    A Large Deck Enclosure Accommodates Higher Volumes of Material for Superior Finish Results, Superior Mulching Results, Less Burden Transferred to the Tractor & Better Ground Speeds.  It's Also Large Enough for the Rear Roller to be Within the Footprint of the Deck (instead of protruding out beyond the back).
    The Large Deck Enclosure is Also Large Enough to Have an Adjustable 'Mulching Door' (placed above the roller & behind the rear deflector)!
    Under Deck 'Mulching Counter Blade' Ensures Reduction of Larger Clippings & Further Reduces the Smaller Ones.
    Full Double Deck Shell Protects the External Shell From Rocks & Other Internal Projectiles:
    Total Deck Thickness is 3/8"!
    Side Plates Are Also 3/8" Thick!
    Large 8" Dia. Rear Roller Provides Mower Deck Suspension & Cutting Height Adjustment (1/2"-5"):
    Rear Roller Also Includes a Full Width Rubber Deflector & Mud Scraper.
    Dual Top Link Pin Holes:
    One Oval for (more) Front to Rear Deck Oscillation.
    One Standard Round Hole for Rigid & Level Deck Suspension.
    Multiple Advantages of This Offsetable Mower Over Static, Center Mounted 3-Point Mowers:
    If You're Mowing Along a Fence Line, Tree Line, Building, etc., Instead of Getting Your Entire Tractor Along Side of the Fence or Building (and risk scraping your tractor tires or snagging & damaging trees, posts, fencing, buildings, etc.), You Can Simply Keep the Offset Part of the Mower Close to the Edges You Want to Mow and Prevent Any Damage to the Tractor, the Trees, Fencing, Walls, etc.  Snagging Posts, Trees or Other Secured Objects Can Also Damage the 3-Point Linkage on the Mower or Even the Pull Arms & Top Link of Your Expensive Tractor.
    Much, Much Better Visibility: If the Edge of Any Mower is Flush With the Sidewall of Your Tractors Tire, Forget About Visibility!  You'll be Cutting With Your Tractor Tire as a 'Guide', Which is ok in Open Areas, But Again, When You're Mowing up Against Obstacles, You Want Visibility, and the Offset Feature Will Provide That.
    It Will Also Eliminate the Need to Look Back Over Your Shoulder to See the Mower Deck.  A Simple Glance to Your Right Gives You Visibility of the Outer Mowing Edge.
    Peruzzo Flail Mowers Provide a Much Better Cut Than Standard Rotary Mowers, Plus With the
    'Forged & Hardened' Hammer
    Blades on This Flail Mower, You Can
    Cut 4" Diameter Material & Get a Very Good Finish Cut Too!
    Peruzzo Flail Mowers Are The Safest & Most Efficient Mowers Available:
    With Peruzzo Flail Mowers, the Possibility of Discharging Dangerous Projectiles is Dramatically Reduced Compared to Conventional Rotary Mowers, and with the Reduced Deck Depth & Weight, They’re the Easiest for You & Your Tractor to Handle!  Plus, the Superior ‘Single-Pass’ Cut of Peruzzo Flail Mowers Provides New Efficiencies by Eliminating Multiple Passes For Excellent Results!
    Optional 'Under Deck Gage Wheel' is 9.00.
    3) Anti-Static (& Oil Resistant) Belts Prevent Bearing Damage From Static Electricity.
    Plus:
    Secure Double Pin Clevis Cylinder Connections.
    Dual Parking Stands.
    PTO Shaft Storage Hook.
    Transport Lock:
    Use the Transport Lock When Transporting From Place to Place to Prevent Excess Stress on Supporting Linkages.
    Sample Photos & Video are of the Model 2200E Bull Cross, But This Listing is for the Bull Cross 1800E (As Stated Above), and
    Only
    for the Bull Cross Mower -
    That Nice Green, 6130 Tractor is Not Included!
    Mower Ships Assembled & Ready To Use:
    This Means No Assembly Headaches from Poor Instructions, No Missing Parts & Associated Delays, No Special Tools, No Knuckle Busters & No Waiting Until It's Assembled Before First Use!
    0.00 Discount Available For Partially
    (90%)
    Assembled Unit!
    Mower Ships with 540RPM PTO Shaft!
    All of These Excellent Features Work Together to Outperform Your Expectations in Rough Cutting, Mulching & Finish Cutting Applications, With Beautiful, Single Pass  Results, With Efficient Ground Speeds & With Ease of Demand on Your Costly Tractor & it's Fuel Tank!  Most of All, it Makes Mowing Fun Again!
    SPECIFICATIONS:
    Rated For 60 To 110HP Tractors.
    Suitable for Cat 2, 3-Point Hitches.
    Mowing Width: 70".
    Overall Deck Width: 72".
    Gearbox & Guard Add 18".
    Overall Depth: 44".
    Distance From Center-line of 3-Point to Outer Edge of Deck is 9'-8".
    Electronically Balanced Rotor Has
    16
    Hammer Style Blades.
    Large, Heavy Duty Blades Weigh 3.5lb's each.
    Severe Service Duty Rotor & Blades Rated To Cut 4"-5" Diameter Material.
    Rotor Speed is 2250RPM's.
    Blade Tip to Blade Tip Speed is 105MPH.
    Requires Two Sets Of Hydraulic Outlets.
    Weight: 1692lb's (Less PTO Shaft, Pallet/Crating, etc.).
    Specifications are based on manufacturer provided data & subject to change.
    Provide Us With Your Zip Code For A Quote Of Our Affordable Nationwide Shipping Prices!
    TYPICALLY IN STOCK, BUT YOU'RE WELCOME TO CHECK ON AVAILABILITY!
    Farm Equipment 24-7
    eBay Store of
    Iowa Farm Equipment
    A FULL SERVICE DEALERSHIP
    Providing Parts & Warranty Coverage Nationwide!